COMPANY HEADER
Print Back
SMT (Surface Mount Technology) process is a modern module manufacturing process, focusing on cost-optimization through a fully automated process. PCB connectors suitable for THR (Through Hole Reflow) soldering method are loaded onto tape-on-reel packaging, which integrates these components into the automated SMT process. Dinkle offers tape-on-reel packaging method for PCB sockets ranging from pitches 3.5 mm to 7.62 mm, meeting the PCB requirements for SMT process. Vacuum nozzle or mechanical gripper tape-on-reel options are both available. With suction method, you have two options available for vertical or horizontal position depending on your application requirement.
Unit of Measure

Specifications

Pitch Diameter

 N/A 3.81 mm0.150 in

Current Rating

 N/A 8 A

Rated Voltage

 N/A 300 V

Level

 N/A Single Level

Type of Locking

 N/A Without

Conductor Material

 N/A Copper Alloy

Conductor Plating

 N/A Tin Plated

Insulation Material

 N/A High-Temperature Plastics

Flammability Standard

 N/A Underwriters Laboratories (UL94 V0)

Rated Voltage According to Underwriters Laboratories (UL)

 N/A 300 V

Rated Voltage According to International Electrotechnical Commission (IEC)

 N/A 320 V

Rated Current According to Underwriters Laboratories (UL)

 N/A 8 A

Rated Current According to International Electrotechnical Commission (IEC)

 N/A 14 A

Rated Impulse Voltage According to International Electrotechnical Commission (IEC)

 N/A 2.5 kV

Number of Position

 N/A 02~24P

Remarks

 N/A THR

Pieces Per Pocket

 N/A 300

Approval

 N/A Underwriters Laboratories (cRUus)

Additional Information

Additional Information

 N/A Vacuum nozzle is commonly used for components placement operations by applying pressure through vacuum, and both vertical and horizontal direction picking for the connectors are supported. Mechanical gripper is designed for uniquely shaped parts, where extra spaces are reserved on the two sides of the connector to accommodate the gripper.